You can set the delay time to keep the headlamps on for up to three minutes after the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done within 10 seconds): 1. Turn the ignition off.
2. Turn the lighting control to the autolamp position.
3. Turn the lighting control to the off position.
4. Turn the ignition on.
5. Turn the ignition off.
6. Turn the lighting control to the autolamp position. The headlamps and parking lamps will turn on.
7. Turn the lighting control to the off position when the desired delay time has been reached. The headlamps and parking lamps will turn off.
You can set the headlamp exit delay to one of the following settings:
• 10 seconds
• 20 seconds
• 120 seconds
Note: You can also adjust the time delay using the display controls in the instrument cluster. See the Information Displays chapter.
Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service y ...
About this manual Thank you for choosing ford. we recommend that you take some time to get to know your vehicle by reading this manual. the more that you know about it, the greater the safety and pleasure you will get from driving it. Warning: Always drive with due care and attention when usin ...
Front manual seats
WARNING: Do not adjust the driver’s seat or seatback while the vehicle is moving. WARNING: Rock the seat backward and forward after releasing the lever to make sure that it is fully engaged. Moving the seats backward and forward WARNING: Before returning the seatback to its original position ...